IKO PLC and IKO Polymeric had a fruitful time networking at the Big 5 International Building & Construction Show at the Dubai World Trade Centre UAE between 25-28 November 2019. They held a popular joint exhibition to promote the IKO brands and products to government and corporate representatives from all over the world. The BigRead more
Blog
Single ply membranes, in certain circumstances can be punctured, but so can other flat roof waterproofing solutions – including built-up bituminous membrane systems. Compared to other types of waterproofing, single ply membranes are easier to repair if they are damaged. There are three key factors to minimise the risk of a puncture occurring: Good housekeepingRead more
IKO PLC has been awarded ISO 45001: 2018 for its Appley Bridge, Clay Cross and Grangemill manufacturing sites. The certification, provided by awarding body Lucideon CICS Ltd, is awarded to companies who can demonstrate an exceptional standard of health and safety management in their workplace. ISO 45001: 2018 is an internationally recognised standard which takesRead more
IKO is delighted to announce that Techjoint saw off tough competition to win the first IKO Contractor Recognition Award. The awards look to celebrate the very best of what IKO Approved contractors can do, not just using IKO products. But from the wider perspective, taking into consideration project delivery, quality of workmanship, CSR and communityRead more
A single ply membrane guarantee can vary in its range of cover, from being a product guarantee only, to including flat roof system design, to also including workmanship/quality of installation. A product guarantee is based on the properties and characteristics of the membrane that can be tested in isolation. The addition of system design retainsRead more
Using components not approved as part of a single ply flat roof system can invalidate the manufacturer guarantee. A warranty or guarantee relies on the manufacturer’s knowledge and confidence that all of the component products have been tested in combination and will achieve certain standards of performance. Any product substitutions should be checked and confirmedRead more
The fire rating of a single ply membrane is determined through standardised testing methods, which take into account the complete flat roof system from the structural deck upwards. There are different fire ratings for construction products depending on what is being tested; for a flat roof system, the resistance of the roof to external fireRead more
The components of a single ply flat roof system – including the single ply membrane itself and thermal insulation boards – should generally be protected at all times. Preferably they should be stored indoors before use, and afforded as much protection as possible once on the roof awaiting installation. BS 6229:2018, the code of practiceRead more
A single ply flat roof waterproofing membrane should be repaired in consultation with the membrane manufacturer, to make sure that the correct type of remedial action is taken for the membrane type. In the event of accidental damage to the membrane, the installing contractor and the membrane manufacturer should be notified immediately to agree aRead more
Is installer training available for single ply membranes? Manufacturers of single ply flat roof membranes offer installer training as part of developing a network of approved or registered contractors. The different materials used to manufacture polymeric single ply membranes depend on different installation techniques, so for system suppliers to guarantee finished roofs it is necessaryRead more
