Detailing membranes are used as an accessory to the ‘standard’ single ply flat roofing membrane, and allow for the waterproofing of complex details. They are ideal when some flexibility and stretch in the membrane is required. Detailing is a particularly critical area of a flat roof build-up. It is no exaggeration to say that aRead more
Blog
We know that our products are only as good as the contractors who install them so we would like to show our appreciation to our valuable customers who stand above the rest and make us proud! That is why we came up with the idea of IKO Contractor Recognition Awards. We would like to hearRead more
Single ply flat roofing system manufacturers only supply their products to a network of approved or registered contractors. Different single ply membranes have different installation requirements and it is only through training and certifying contractors that manufacturers can have the confidence that the quality and reputation of their product – and single ply flat roofingRead more
A single ply membrane can be used to provide the waterproofing finish for a pitched roof, and there is no limit on the slope of the roof for which it can be used. BS 6229:2018, the code of practice for flat roofs with continuously supported flexible waterproof coverings, even advises that many of its recommendationsRead more
Single ply flat roof systems can be used to waterproof roof terraces or balconies, and ballasted flat roofs. The waterproofing should not be damaged by the installation of gravel ballast, concrete paving slabs or timber decking, and it may be necessary to install a protection fleece or separating layer before loading the roof with itsRead more
There is no limit on the height to which the single ply membrane can be bonded up a flat roof upstand. As long as the 150mm minimum upstand height is achieved then theoretically the upstand can extend to any height to suit the roof design and roof edge detail. Practical considerations, however, are likely toRead more
Single ply membrane flat roofs are compatible with green roof systems. A green roof system is effectively a type of roof ballast which, used in sufficient thickness, can secure the roof system against wind uplift. The green roof system should have a dry weight of at least 80 kg/m2, or otherwise in accordance with structuralRead more
